M&M TURBINE OILS
M&M Turbine oil is a premium product highly refined base oil with selected additives combine to give excellent oxidation stability, rust protection, high VI, resistance to air entrainment, resistance to foaming, and good demulsibility.
suitable for long-term use in power stations to lubricate steam and gas turbines.
It can be used in applications where inhibited oils of the appropriate viscosity are required, as in axial and centrifugal compressors and certain hydraulic systems which require high quality lubricants.
|M&M Turbine oils Series||Test method|
|Viscosity cSt @ 40°C||ASTM D 445||32||46||68||100||150||219|
|Viscosity cSt @ 100°C||ASTM D 445||5.54||7.08||9.3||12.5||16.9||21.1|
|viscosity index||ASTM D2270||110||112||114||118||121||114|
|Flash point °C||ASTM D 92||202||208||218||222||230||236|
|Pour point °C||ASTM D 97||-11||-10||-10||-10||-10||-9|
|Total Acid number (TAN)||ASTM-D974||0.15 max||0.15 max||0.15 max||0.15 max||0.15 max||0.15 max|
|Rust producer A&B (48hrs)||ASTM-D665||Pass||Pass||Pass||Pass||Pass||Pass|
|Rust control after water washing||ASTM-D665B||Pass||Pass||Pass||Pass||Pass||Pass|
They are recommended for use in most hydraulic systems with gear, vane, radial piston and axial piston pumps where pressures and speeds require an anti-wear product. These oils will provide excellent performance with respect to system operation, wear protection, and economy.
- High oxidation stability.
- Good thermal stability.
- Excellent hydrolytic stability.
- No sludge formation.
- Good protection against corrosion of steel and non-ferrous metals.
- Good demulsifying behavior.
- Good foam behavior.
ASTM D 4304 type I
Siemens TLV 901304
HEALTH AND SAFETY:
These products produce no adverse effects on health when properly handled and used. No special protections are suggested beyond attention to good personal hygiene including laundered oil-stock clothing and washing skin-contact areas with soap and water.