M&M HYDRAULIC AW SERIES
The M&M Hydraulic AW series are meet major hydraulic pump manufacturers specifications including the Denison HFO AND Vickers 35VO25 Vane pump test.
These oils are approved by Cincinnati Milacron for use in systems which require anti-wear hydraulic fluids.
|M&M Hydraulic AW Series||Test method|
|Viscosity cSt @ 40°C||ASTM D 445||20.1||32.6||46||66.7||98.8|
|Viscosity cSt @ 100°C||ASTM D 445||4.1||5.5||6.8||8.5||11.1|
|viscosity index||ASTM D2270||101||104||101||98||97|
|Specific gravity||ASTM D 1296||0.865||0.878||0.883||0.889||0.892|
|Flash point °C||ASTM D 92||185||218||230||238||240|
|Pour point °C||ASTM D 97||-18||-12||-9||-9||-6|
|Neutralization No. mg KOH/g||ASTM D 664||0.72||0.72||0.72||0.72||0.72|
|Color||ASTM D 1500||0.5||0.5||1.0||1.0||1.5|
They are recommended for use in most hydraulic systems with gear, vane, radial piston and axial piston pumps where pressures and speeds require an anti-wear product. These oils will provide excellent performance with respect to system operation, wear protection, and economy.
- Efficient anti-wear performance
- Provide rust and corrosion protection
Cincinnati Milacron P-68,P-70&P-69
DIN 51524 Part II, Part III
HEALTH AND SAFETY:
These products produce no adverse effects on health when properly handled and used. No special protections are suggested beyond attention to good personal hygiene including laundered oil-stock clothing and washing skin-contact areas with soap and water.