M&M HYDRAULIC VH SERIES

INDUSTRIAL LUBRICANTS

The M&M Hydraulic Oils VH are anti-wear type oils blended with high quality solvent-treated base oils incorporating special additives that impart superior viscosity/temperature characteristics. They have a high viscosity index and low pour points to provide fluidity at sub-zero temperature, and they remain suitable for widely varying ambient temperature.

M&M Hydraulic AW Series Test method
ISOVG 32 46 68 100 150
Viscosity cSt @ 40°C ASTM D 445 32.6 46 66.7 98.8 148
Viscosity cSt @ 100°C ASTM D 445 5.5 6.8 8.5 11.1 15
viscosity index ASTM D2270 100 100 98 97 95
Specific gravity ASTM D 1296 0.878 0.883 0.889 0.892 0.895
Flash point °C ASTM D 92 214 220 234 238 240
Pour point °C ASTM D 97 -18 -12 -9 -9 -6
Neutralization No. mg KOH/g ASTM D 664 0.8 0.8 0.8 0.8 0.8
Color ASTM D 1500 0.5 1.0 1.0 1.5 1.5
APPLICATIONS:

Universal high-quality hydraulic oils with improved filterability and hydrolytic, thermal and oxidation stability. Intended primarily for lubrication of three main types of hydraulic system pumps such as vane, piston, and gear pumps. Suitable for use in machine tool hydraulic systems and drive units and especially numerical controlled machine tools incorporating electro-hydraulic pulse engines and precision control valves sensitive to deposits and blocking. Meet or exceed the requirements of ISO 6743/4 HM, ISO 11158 HM, DIN 51524/Teil 2 HLP, Sperry Vickers I-286-S and M-2950-S. Approved for Denison HF-0, HF-1,HF-2 and Cincinnati Machine P-68, P-69, P-70 specifications.

BENEFITS:
  • Efficient anti-wear performance
  • Provide rust and corrosion protection
HEALTH AND SAFETY:

These products produce no adverse effects on health when properly handled and used. No special protections are suggested beyond attention to good personal hygiene including laundered oil-stock clothing and washing skin-contact areas with soap and water.

AVAILABLE SIZES:

20 L

200 L